Safty First in Carbon Co. UT

Complete Auto Repair Service  Says   Safety   First

Keep Your Engine Tuned Up      

It's up to you: Dirty or Clean?     Car care is a win - win situation:
           *Help's the environment
           *Your car will run more efficiently
           *Will be safer
           *Improves your resale value
   

• Keeping it clean
                            Change the spark plugs: A misfiring spark plug can reduce fuel efficiency as much as 30%.
  Service you Air conditioner:
                            According to the Environmental Protection Agency, almost 1/3 of CFCs released into the atmosphere come from mobile air conditioners.
                                                          *Have it serviced by a technician who is certified to
                                                           handle / recycle refrigerants.
                                                          * It is important to use a qualified technician because leaks can occur during service / repair.
        D.I.Y. = Do it Yourselfers:          Dispose of used motor oil, anti-freeze / coolant, tires, & old batteries  properly.  ( call your local municipal or county gov. or recycling sites.)
                                                                   {Each year D.I.Y.s dump twenty times more than by the tanker Exxon Valdez.}
       Of course there is always:          Other things to check = Oil Change, Belts, Hoses, Battery, Tire Inflation
                                                                 and more....

Enjoy your Vehicle more by keeping it running smoothly.

C.A.R.S. = Complete Auto Repair Service
660 E. Main St. Wellington UT. 84542
Phone Soon
Next to Post Office
North of Moab
http://www.carsbellingham.com/

Oxygen Sensor in Wellington UT at CARS

 Oxygen Sensor And What it  Does

Oxygen Sensors measure the amount of oxygen in the exhaust gases and send a signal to the Engine Control Unit (ECU). The ECU monitors the signal and accordingly adjusts the amount of fuel entering the engine, keeping the air-fuel ratio closer to stoichiometric ratio. Thus, an Oxygen Sensor optimizes the performance and fuel efficiency and minimizes emissions.
High oxygen content in the exhaust gas indicates a lean mixture which affects performance and causes problems like knocking, misfire and may also damage the engine. Low oxygen content indicates a rich mixture which causes excess emissions and reduces the fuel economy.
 How many Oxygen Sensors are there in my vehicle and where they are located?
The number of oxygen sensor depends on the car make, model and mainly on the size and type of the engine. It also depends on the type of the OBD sensor: OBD-I or OBD-II.
In most cases, there are two oxygen sensors in a four cylinder engine. One is located on the exhaust manifold before the catalytic converter and another is located after the catalytic converter on the exhaust pipe. In V6 or V8 engines there are four oxygen sensors, two O2 sensors are located before catalytic converter on each cylinder bank and other two O2 sensors are located after catalytic converter on respective banks.
How Does the Oxygen Sensor Work?
 An Oxygen sensor is installed in such a way that one of its surfaces is in contact with the exhaust gas flow and another surface with the outside air. Oxygen sensors do not measure the concentration of the oxygen gas in the exhaust gas, but measure the difference between the amount of oxygen in the exhaust and in outside air.
 Based on the oxygen quantity in exhaust gases, voltage signals are provided constantly to the ECU so that it can maintain a stoichiometric air fuel ratio by regulating the fuel injection.
 What are Upstream Oxygen Sensors and Downstream Oxygen Sensors?
 The upstream oxygen sensor is located right before the catalytic converter. It is installed in the exhaust manifold or in the exhaust pipe near the engine. The role of the upstream oxygen sensor is to optimize the air-fuel ratio entering the engine. There can be one or two oxygen sensors depending on the number of cylinders.
 Upstream monitors the oxygen gas in the exhaust gas and provides a signal to the ECU whether the mixture is weak or rich. When there is a high level of oxygen in the exhaust gas, ECU assumes that the air-fuel mixture is lean - so it adds more fuel to the engine. And when there is low oxygen in the in the exhaust, the ECU assumes that the air-fuel mixture is rich and it reduces the fuel supply accordingly.
 The downstream oxygen sensor is located in the exhaust pipe after the catalytic converter. The role of the downstream oxygen sensor is to monitor the working and efficiency of the catalytic converter. There may be one or two oxygen sensors depending on the number of cylinders.
 The ECU compares the signal from upstream and downstream sensors. If the catalytic convertor is working properly, the amount of oxygen after the catalytic converter should be near to the specified constant value.
 If the signal from the downstream sensor varies from the constant value, this tells you that the catalytic converter is not working properly. Hence, the ECU switch on the ‘CHECK ENGINE’ light on the dash.
 Why and How Often should I change my Oxygen Sensor?
 Oxygen sensors play an important role in both fuel efficiency and engine performance. If Oxygen Sensors are not performing well, it leads to lowered performance of the engine and poor fuel efficiency which ultimately decreases your vehicle's drivability. Hence, it is of utmost importance to keep the Oxygen Sensors up to the mark for the longevity of your vehicle and to receive efficient performance from it.
 Every vehicle manufacturer has different recommendations on how often the oxygen sensor should be changed. It is specified at the beginning in terms of mileage or time period depending upon expected day to day use of the vehicle. However, it is strongly advised to get it checked at regular intervals as it depends upon gas-containment, as well as local weather.
 How do I know that my Oxygen Sensor is not working properly?
 There is no particular symptom that indicates malfunctioning of Oxygen Sensors. One case would be drastic decrease of fuel economy or mileage.   Also, you need to check your Oxygen Sensors if the engine is not responding quickly or showing less power while running. Other reasons may include engine hesitation, engine stalling, increased exhaust emission, rough idling and engine pinning.
 What are possible causes of Oxygen sensors to be damaged?
 Your car's Oxygen Sensor can get damaged from the following
■By incorrect use of silicone gasket sealers.
■Oil deposits on the outer surface.
■By Antifreeze
■If the engine runs on a rich air-fuel mixture for a long time
■By natural aging or accident shocks.

C.A.R.S. = Complete Auto Repair Service in Carbon County UT
660 E. Main St. Wellington UT 84542
Hwy 191 / 6  Next to Post office
http://www.carsbellingham.com/
www.facebook.com/CARSbellingham
North of Moab UT / South of Price, Helper, SLC UT

Clutch Repair in Helper / Price Utah

Clutch Repair in Utah

The clutch in your vehicle works by applying force against a flywheel mated to your engine using a clutch disc and pressure plate. The clutch is made of friction material and is designed to "grab" the flywheel as it turns.
 Over time, your clutch disc will wear down and begin to slip. When this happens, you will have trouble accelerating in any gear because the clutch will lose the ability to "grab" the flywheel. At this point, the clutch disc will need to be fixed.

 Come See the experts at CARS = Complete Auto Repair Service   to help you diagnose your clutch problems and get your car back on the road.

https://www.carsbellingham.com/
660 E. Main St. Wellington UT 84542
Hwy 191 / 6   Next to Post Office

North of Moab

South of Price, Helper, SLC, Ogden UT in Carbon Co. UT

How to pick a - Auto Repair Shop

Utah Auto Repair = Service Tips

How to pick a service center.

1) Do your homework before taking your vehicle for service:
I know, we all hate home work and don't have time but it will save you heart ache in the end.
So, Shop around before you need one. you will make a better decision when your not rushed.
1) Ask Friends + Word of mouth
2) Look for vehicles of equal value
3) Good equipment
4) Is there evidence of qualified technicians? diplomas, certificates, advanced training, ASE
5) Start with a simple job = oil change, wiper blades, batteries.

2) Once you choose a Repair Shop ...
1) Describe symptoms or supply a written list of recent problems.
( sounds, vibrations, odors, lights, change in engine performance or handling, braking, steering...)
2) Don't rush for an on the spot diagnosis.
Ask to be called for costs, course of Acton. ( Don't forget to leave a phone number / e-mail )
3) Understand shop policies about = Labor rates, guarantees, and payment methods.
3) Follow - up ...
1) Keep GOOD records: All Service and repair paperwork!
2) Reward good service with repeat business. This also establishes a relationship.
3) If the service was not all you expected. - Don't rush to another shop.
( discuss the problem or issue with manager or owner. Give them a chance to resolve the problem.)
A Reputable shop will value there customers feedback &  try to make things right.

Happy Trails To You
CARS = Complete Auto Repair Service 
www.carsbellingham.com

(435) 637-5337

660 E, Main St. Wellington UT  84542

Hwy 191/6  Next to Post Office
North of Moab
South of Price, Helper, SLC, Provo UT

Auto Repair at Competitive Prices Carbon County Utah CARS

Auto Repair

Did you know that Complete Auto Repair Service has
competitive prices every day ? 
We don't have a lot of Coupons because we try to keep our prices fair everyday so you can get the best price with out coupons. 
Stop on by to get an estimate and see for yourself what you think. 
  We feel some of our reviews say a lot about how we are doing so we would love to hear from you.

C.A.R.S. = Complete Auto Repair Service
(435) 637-5337

660 E. Main St. Wellington UT 84542
Hwy 191/6  Next to post office
North of Moab

South of Price, Helper, SLC, Ogden UT

CARS Auto Repair Utah north of Moab

CARS = Complete Auto Repair Service is now also located in Wellington UT.   
=Former Kwik Lube and Tire=

New shop Opens Late June /July 2022.

carsbellingham.com for more info. 

660 E Main St. Wellington UT  84542
Phone Soon. 
carsbellingham.com